PAC - Acoustic Emission

Intrinsically Safe Products from Physical Acoustics Corporation

Intrinsically Safe Products

Some AE applications require that the AE equipment be connected within hazardous gaseous environments where there is risk of ignition or explosion. It is important to have AE equipment that has been certified as Intrinsically Safe (IS) for use in these environments. Physical Acoustics’s 1276 family of products have been certified to operate within the highest and most hazardous gas groups, allowing them to be used in any hazardous environment requiring IS certified equipment.

1276 Intrinsically Safe Product Series:

PAC’s 1276 Series of Intrinsically Safe products include 9 certified sensors, a preamplifier and an ASL, 4-20ma output subsystem, and an IS Barrier, providing a complete AE monitoring solution for hazardous environments. These products carry an ATEX certification “II (1) G D” and a certification of EEx ia IIC-T4, meaning that the products are certified to be used in locations where explosive gas/air and ignitable dust mixtures are always present. These gases include Hydrogen and Acetylene, the most easily ignited gases.

PAC’s 1276 family of products can be broken down into two applications.

- AE Continuous Monitoring: The 1276-1 series when used with an IS barrier and any one of 9 certified IS sensors provides an ASL (Average Signal Level) 4-20 milliamp output for (3 wire) direct connection to process control equipment, for detecting leaks in piping, plant and valves, and monitoring process conditions through-out the plant. The 1276-1 provides an ASL output throughout the standard Acoustic Emission dynamic range of 0 – 100dB.
- AE Preamplifier/Sensor for use with traditional AE Equipment for inspection and on-line monitoring: The 1276-2 is an IS preamplifier which is used with an IS barrier and any one of 9 certified IS sensors which is connected to standard AE Instruments (which are located outside the hazardous area for conducting traditional periodic AE testing and evaluation of plant equipment or for use in permanent on-line monitoring applications.

Please see the links below for more information

195 Clarksville Road · Princeton Jct, NJ 08550 · USA
Tel: +1.609.716.4000 · Fax: +1.609.716.0706
E-Mail: sales.systems@mistrasgroup.com

Copyright © 2010 MISTRAS Group, Inc. All Rights Reserved.

ISO-9001Certified FM Certified EX Certified CE Certified